ILI9328 TFT display driver library
The ILI9328 display controller is supported by the RAMTEX S6D0129 display driver library package.
More info about Graphic RGB Color library (S6D0129 family)
Full GUI display driver C source code. Processor and C compiler independent.
ILI9328 display controller characteristics
Below is a brief introduction to the main characteristics for the ILI9328 RGB display controller (seen from a software driver design viewpoint).
For information about the ILI9328 driver software support please go to the library description.
ILI9328 device type
- COG RGB color display controller for use in small embedded systems with on-chip frame buffer and TFT screen driver.
- The ILI9328 supports TFT screens with a size up to 240 x 320 pixels (WxH)
- On-chip TFT driver with voltage generator
- RGB pixel resolution (bits per pixel): 16-bit, 18-bit.
- ILI9328 frame buffer organization: 240 RGB pixels on scan line, 320 lines.
Processor interfaces on ILI9328
ILI9328 parallel bus interface
- Parallel bus types: 8080 bus type
- Parallel bus size: 8-bit, 16-bit, 18 (32)-bit.
- Addressing concept: Indexed bus interface (1 chip select pin + 1 address bit pin (Data/Command))
Serial bus interfaces on ILI9328
- SPI bus: 3-wire: /CS, SDIN, SCLK. SPI-3 first byte in CS frame contains: device code, DC, RW
- In SPI bus mode the frame buffer memory can not be read.
- The bus interfaces are all supported by the ILI9328 display driver software package.
Special ILI9328 hardware features:
- 0-180, 90-270 degree frame buffer rotation with hardware support. Portrait mode, landscape mode.
- Full driver software support.
Display controller vendor
- ILI TECHNOLOGY CORP. http://www.ilitek.com
Seeking a display controller equivalent to ILI9328?
These display controllers have similar internal configuration and graphic rendering features.
The differences are primarily related to display screen sizes or available bus interface types.