SSD2119 TFT display driver library

The SSD2119 display controller is supported by the RAMTEX S6D0129 display driver library package.
Full GUI display driver C source code. Processor and C compiler independent.

SSD2119 display controller characteristics

Below is a brief introduction to the main characteristics for the SSD2119 RGB display controller (seen from a software driver design viewpoint).

For information about the SSD2119 driver software support please go to the library description.

SSD2119 device type

• COG RGB color display controller for use in small embedded systems with on-chip frame buffer and TFT screen driver.
• The SSD2119 supports TFT screens with a size up to 320 x 240 pixels (WxH)
• On-chip TFT driver with voltage generator

Frame buffer

• RGB pixel resolution (bits per pixel): 16-bit, 18-bit.
• SSD2119 frame buffer organization: 320 RGB pixels on scan line, 240 lines.

Processor interfaces on SSD2119

• SSD2119 parallel bus interface

  • Parallel bus types: 8080 bus type and 6800 bus type
  • Parallel bus size: 8-bit, 16-bit, 18 (32)-bit.
  • Addressing concept: Indexed bus interface (1 chip select pin + 1 address bit pin (Data/Command))

• Serial bus interfaces on SSD2119

  • SPI bus: 4-wire: /CS, DC, SDIN, SCLK.
  • SPI bus: 3-wire: /CS, SDIN, SCLK. SPI-3 uses a 9 bit byte frame where first bit is DC
• The bus interfaces are all supported by the SSD2119 display driver software package.

Special SSD2119 hardware features:

• 0-180, 90-270 degree frame buffer rotation with hardware support. Portrait mode, landscape mode.
• Full driver software support.

Display controller vendor

• SOLOMON SYSTECH Ltd. https://www.solomon-systech.com